Ritron DATAFLOW RTU Series Podręcznik Użytkownika Pobierz pdf (Strona 38)

DATAFLOW RTU

6.4 Load the FULL SCADA CONFIG, using RTU Programming Software. The configuration is

stored in RTU RAM, which has a large capacitor to hold the information in memory for an

extended period of time  3 months or longer. If the stored configuration is lost, reload it with

the RTU Programming Software.

6.4.1 If the application requires a M

ODBUS controller to download the FULL SCADA CONFIG, consult

OMEGA for the proper procedure. This procedure varies depending on the type of M

ODBUS

controller you are using.

CAUTION:

For Firmware Versions earlier than 3.25 (released in the 2

quarter of 1998), in a SCADA system,

use unit IDs or M

ODBUS addresses from 40 to 255 only. Communication errors may result from using

IDs and addresses from 1 to 39.

7. TECHNICAL NOTES

7.1 CLEARING SERIAL RESPONSE DELAY for Firmware Version 3.27 or later: this note explains how to set

the DATAFLOW RTU serial response delay to 0 (zero). DATAFLOW RTU configuration can be changed

either before or after programming the serial delay. (Any other aspect of Configuration, except Serial

Response Delay, is accessed from the Configuration Screen.)

7.1.1 From the Main Screen, press 3 to select Utilities.

7.1.2 From the Utilities Menu, press 1 to select EEPROM Block Edit.

7.1.3 Press 3 to Upload.

7.1.4 Type the hexadecimal value 00 (zero, zero) into Location 01A6. See Figure B1, below.

7.1.5 Press F4 to download the data to the DATAFLOW RTU.

7.1.6 Press F10" to Exit the EEPROM block edit screen.

7.1.7 Press R to return to the Main Screen.

( B-13)

00 programmed

into Location 01A6

************** RTU EEPROM CONFIGURATION SCREEN **************

Device ID: 01 File Name: DEFAULT.cnf

Address -0-1 -2-3 -4-5 -6-7 -8-9 -A-B -C-D -E-F

$0100 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$0110 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

---------- -------------------------------------------------------------------------------------------

$0120 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$0130 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$0140 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$0150 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$0160 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$0170 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$0180 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$0190 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$01A0 XXXX XXXX XXXX 00XX XXXX XXXX XXXX XXXX

$01B0 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$01C0 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$01D0 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$01E0 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

$01F0 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

Figure B1 - Configuration Screen

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 62 63

Komentarze do niniejszej Instrukcji

Brak uwag

Ritron DATAFLOW RTU Series Podręcznik Użytkownika Strona 38

Komentarze do niniejszej Instrukcji