Ritron DATAFLOW RTU Series Podręcznik Użytkownika Pobierz pdf (Strona 28)

DATAFLOW RTU

4.2.4 RTU Programming Software Disk, OMEGA part number RTU-PCPS-3.0, provided with the

programming kit to facilitate configuration of a DATAFLOW RTU is version 3.0. To install it on

the computer hard drive, insert the 3.5" diskette into the floppy drive, select that drive and type

INSTALL.EXE. Follow the instructions on the computer monitor screen to load the software

onto the hard drive. DATAFLOW RTU programming software is not copy-protected; it may be

copied, or loaded onto more than one computer.

DATAFLOW RTU PROGRAMMING SOFTWARE

5.1 The DATAFLOW RTU programming software is a DOS-based executable program. System

requirement is a PC-compatible computer with a serial port. The availability of a mouse and a

printer is helpful, but not required.

5.2 Menus and function keys are used for program navigation. Execute menu choices by pressing

the key of the corresponding menu choice number or by clicking the mouse on the menu

choice. Function key commands are executed when they are displayed by pressing the

corresponding function key or by clicking the mouse on the command.

5.3 The user interfaces the programming software by modifying highlighted fields of the monitor

screen display. Position the cursor in the chosen highlighted field, then type in the desired text.

The cursor can be moved using the mouse, or shifted to the next field by pressing the <TAB>

key. Press <SHIFT> <TAB> to shift the cursor to the previous field. The <ENTER> key, the

arrow keys and page control keys can also be used to move the cursor.

Press the <F1> FIELD HELP key at any time. A Help dialog box will appear on the monitor

screen with a brief explanation of the selected field.

5.4 The <F3> and <F4> function keys are used in several fields of the programming software. The

<F3> UPLOAD key transfers configuration data from the DATAFLOW RTU to the computer.

The <F4> DOWNLOAD key transfers configuration data from the computer to the DATAFLOW

RTU. UPLOADed and DOWNLOADed data is transferred over the serial link.

5.4.1 The <F3> UPLOAD key executes the upload function by causing the computer to read the RTU

configuration from the DATAFLOW RTU. When the configuration is successfully read, all

programming field values are updated to the current RTU configuration.

NOTE: If an upload is unsuccessfully attempted, none of the field values will update. The

computer indicates an unsuccessful upload by displaying a message in the lower right corner of

the monitor screen and by sounding a two-tone beep.

5.4.2 The <F4> DOWNLOAD key executes the download function by causing the computer to write

all current field values to the DATAFLOW RTU by sending 16 sequential messages.

NOTE: If one or more of these messages is unsuccessfully sent, the RTU configuration may

be corrupted. The computer indicates an unsuccessful download by displaying a message in

the lower right corner of the monitor screen and by sounding a two-tone beep.

When these signals of an unsuccessful download are given, attempt the download operation

again. When the download is successful, the current field values are successfully written so the

RTUs configurations are the same as the computer field values.

( B-3 )

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 62 63

Brak uwag

Ritron DATAFLOW RTU Series Podręcznik Użytkownika Strona 28